|
Instruction for use
When you obtain a uniform paste, spread it on the
floor-foundation. Glue must be trowelled on the substrate in
such a way as to incorporate all dust. Use the adhesive in
small spaces every time, because before the glue has made a
superficial skin, you have to lay the wooden elements on the
glue bed, making sure that all the surface is covered by glue.
Apply a strong pressure over the pieces just laid down to
ensure the complete contact with the skin of glue. Glue will
have to be placed also on the front of short strips and not on
the sides, which must be clean, degreased, dry, sound and free
from detached parts, wax and other similar substances. Where
the substrate meets the wall, expansion joints should be present
in all large rooms. Don’t walk on the new floor at least in the
first 6-8 hours, until the adhesive starts drying. Clean
immediately the dirty tools with a solvent. Since the adhesive
dries completely within 24-48 hours after laying, it’s possible
to remove it only using appropriate tools.
Safety advices
Read carefully the informations about the security of this
product before using it. Follow anyway the current security laws
during the application. Be sure to guarantee an adequate
ventilation of the rooms during installation; we suggest the
application of a protective cream for hands.
* Check anyway the technical bulletin
** This product can be used only by professional men
|
