 |
 |
| |
|
|
 |
 |
|
Main uses
Two-component glue to be mixed before use in the following
ratio:
- component A: 9 parts in weight;
- component B: 1 part in weight.
This adhesive is used for glueing wooden inlaid strips and
laths directly onto concrete screed without using joints; it
can be used also for glueing all types of wood flooring onto
pre-existent ceramic tile, marble, Palladian, sheet metal
floors.
The glueing obtained with this adhesive correspond to the
DIN 281 regulations.
It can be used also with wheel-chair type DIN 68131 and for
glueing on heated subfloor.
|
| Features |
| Colour:
|
brown
or beige |
| Chemical
components: |
epossidic
polyurethanic resin |
| Cleaning: |
with
denatured alcohol or specific product while it is still
dry |
| Application: |
only on the
substrate and ever using an adequate toothed trowel in order to
reach the best glueing results. Pour B-component in the container
of A-component and mix carefully, preferably with an electric mixer
(drill) having about 300-600 r.p.m. until you achieve a uniform,
beige-coloured paste |
| Preparation
time: |
about
60 minutes |
| Use: |
about
1000-1400 g/m2, depending on the notches of the trowel and the
sub-floor |
| Max
open time: |
1-2
hours according to ambient temperature |
| Total
hardening time: |
24-48
hours according to the temperature. The finished floor may only
be sanded at the end of this drying period |
| Application
temperature: |
not less
than +10° C |
| Storage
temperature: |
not less
than +5° C, store away from frost |
| Storage: |
12 months
at ambient temperature |
| Safety
advices: |
A-component
could irritate the skin because it contains epossidic resins.
B-component could irritate the skin because it contains aliphatic
poly-amines.
Never breathe its vapours and be sure to guarantee an adequate ventilation
of the rooms during installation. |
|
|
|
|
|
