|
Instructon for use
When you obtain a uniform paste, spread it on the
floor-foundation. Glue must be trowelled on the substrate in
such a way as to incorporate all dust. Use the adhesive in small
spaces every time, because before the glue has made a superficial
skin, you have to lay the wooden elements on the glue bed, making
sure that all the surface is covered by glue. Apply a strong
pressure over the pieces just laid down to ensure the complete
contact with the skin of glue. Glue will have to be placed also
on the front of short strips and not on the sides, which must be
clean, degreased, dry, sound and free from detached parts, wax
and other similar substances. Where the substrate meets the wall,
expansion joints should be present in all large rooms. Don’t walk
on the new floor at least in the first 6-8 hours, until the
adhesive starts drying. Clean immediately the dirty tools with a
solvent. Since the adhesive dries completely within 24-48 hours
after laying, it’s possible to remove it only using appropriate
tools.
Safety advices
Check carefully the advices given in the relevant Safety Data
Sheet. Follow anyway the current security laws during the
application.
* Check anyway the technical bulletin
** This product can be used only by professional men
|
