|
Instruction for use
Eliminate any spots or glue slaverings from the surface of the
wooden floor using stain remover solvent for glue residues,
then clean out the floor carefully to get rid of eventual dust
and abrasive particles. Shake well the container before use.
Apply directly on the whole surface using a paint roller or a
flexible rubber trowel. Polish as soon as dry with a single
brush and felt polishing disk (white).
Maintenance
Maintenance of the wooden floors treated with this product can
be performed as follows:
1- Clean with water and neutral detergent for wooden floors as
per technical instructions.
2- If necessary, re-apply the product.
Health and safety advice
Before use obtain the relevant Safety Data Sheet and follow the
advice given. Follow anyway the current security laws during the
application. The product and its vapours are flammable. Keep
away from naked flames and sparks. Do not smoke. Ensure adequate
air ventilation of the rooms while and after working.
* Check anyway the technical bulletin
** This product can be used only by professional men
|
